Learn how to modify controller settings, pair and charge a DualSense™ wireless controller with a PlayStation 5 console, and what actions to follow for controller problems.
How to connect a wireless DualSense controller to a PS5 system
You must pair a controller with your console before using it for the first time.
- Verify that your PS5 console is turned on.
- Utilizing the supplied USB cable, connect the controller to your gaming system.
- Hit the PS button to turn your controller back on. The player indicator turns on once the light bar has finished blinking.
- You can use your controller wirelessly after its battery has adequate power by unplugging the USB cable.
- Please be aware that your controller can only be paired with one PS5 system at once. You must pair your controller with the other console if you wish to use it with it.
- Up to four controllers can be used simultaneously. Each player receives a colour when you press the PS button.
How to charge a DualSense wireless controller
By choosing Accessories in the control centre, you may check the battery level in your controller.
Your controller’s battery begins to charge as soon as you plug in the USB wire to your PS5 console. The battery icon moves as it charges. Press the PS button to make sure it is off. following the light bar
How to charge in rest mode
When your console is in rest mode, charge your controller as follows:
- Activate Settings > System > Power Saving.
- Choose Features Available in Rest Mode, and choose Always or 3 Hours for Supply Power to USB Ports.
The light bar on your controller progressively flashes orange when charging when your console is in rest mode. The light bar shuts off after charging is finished.
charging issues
In case you run into any difficulties while attempting to charge your controller, try the next steps:
- It is a Type-C to Type-A USB cable that is included with your PS5 system. The bigger, rectangular end is Type-A, while the smaller end (which inserts into the controller) is Type-C.
- A different USB-A connector on the PS5 console might accept the USB cable that was included with it.
- Try switching to a different “charge and sync” or “charging and data” Type-C to Type-A USB cord. The usage of cables marked “Charge only” is prohibited.
- If you have a Type-C to Type-C USB cord, try using it. If you have a charger that complies with the USB standard, you can also use it. Please be aware that not all USB chargers can power the DualSense wireless controller.
Charge-level indications
On the DualSense wireless controller, press the PS button to check the status while it is charging. An animated battery icon will be visible on the screen while the DualSense wireless controller is charging.
The battery indication on the DualSense wireless controller will stop animating and show three bars when it is completely charged.
| Related Article: How to Get Premium Avatars on PS5 |
How to adjust DualSense wireless controller and audio settings
You can adjust the output device, volume levels and voice chat balance via the control center:
- To display the control centre, press and hold the PS button. Then, click Sound and select the desired setting.
- To mute and unmute your microphone, use the (mute) button on your controller.
- Your microphone and speakers will be muted if you press and hold the (mute) button on your controller. Your microphone is muted and all speakers’ sound output is turned off when the button blinks.
- To get back to the starting point, press the button once again.
For general controller settings:
- Select Settings > Accessories from the home screen. Choose Controllers.
- From this menu, you can change your loudness, vibration intensity, trigger effect intensity, and controller indicator brightness.
How to update DualSense wireless controller device software
Your controller’s software may be upgraded if you connect it. Utilizing the supplied USB cord, attach your controller to your PS5 console and follow the on-screen instructions.
Go to Settings > Accessories > Controllers > Wireless Controller Device Software to manually launch an update.
Using a PC, you may also update the software on your DualSense wireless controller device. For more details, see the material below.
Your controller’s software may be upgraded if you connect it. Utilizing the supplied USB cord, attach your controller to your PS5 console and follow the on-screen instructions.
Go to Settings > Accessories > Controllers > Wireless Controller Device Software to manually launch an update.
Using a PC, you may also update the software on your DualSense wireless controller device.
A wireless DualSense controller giving you problems?
Please visit the PlayStation Repairs diagnostic tool if you have followed the above instructions yet still believe your controller is not connecting properly.
DualSense wireless controller for PS5 console support FAQ:
Why won’t my PS5 controller connect to my PS5?
Reasons a PS5 controller could not be working
Your PS5 controller not connecting to the console can happen for a number of reasons:
- A different device is synced with the controller.
- Your controller will become unpaired from your PS5 if you pair it with a computer or another console. Bluetooth connectivity issues with your controller.
How to reset your DualSense wireless controller?
- Shut off your PS5 system.
- Find the little reset button on the controller’s rear.
- To insert the button into the hole, use a little tool.
- Press the PS button to connect the controller to your PlayStation®5 console using the USB cable that was included with your console.
Why is my PS5 controller flashing blue and not turning on?
The PS5 controller is actually attempting to pair with the console when the blue light on the PS5 blinks. However, if the blue light keeps flashing, there can be an issue syncing any two devices, such as a controller and charger or a controller and console.
