Why Is My PS4 Controller Flashing Blue And Not Connecting?

I detest it when my hardware gives me issues just when I want to unwind with some fantastic video games.

Some PS4 users have reported that their wireless controllers flash blue even when they are not connected to the system.

Together, let’s examine this issue and find a solution so you may resume gaming.

Why Is My PS4 Controller Flashing Blue And Not Connecting?

Your PS4 may be flashing blue and not connecting for a number of reasons, but it’s simpler to just fix the issue rather than figure out exactly what went wrong. Restart both your system and your PS4 controller. If it doesn’t work, try resetting your console to its factory defaults or looking at the hard disc.

Additionally, you should inspect the PS4’s power cable because a broken wire can make it impossible for controllers to connect.

Sometimes this is a simple problem to solve, other times it is more complicated.

Continue reading to observe every step in the troubleshooting process and resume gaming.

Easiest Fixes

Your PS4 controller is attempting to connect to your console if it is blinking blue.

Usually, it only takes a few seconds for it to connect successfully.

The issue is that occasionally you’ll have to wait around for several seconds or even minutes before realising that it’s not working.

Here, I’ll focus on the simplest solutions.

All of these entail modifying the controller directly.

I advise trying these measures first because they will probably fix the issue.

Restart the PS4 Controller

How do you fix a PS4 controller with a flickering blue light? Most likely, restarting the controller will fix the issue.

Additionally, this is the simplest way to solve the issue.

Make sure the controller is charged before anything else. Charge the battery for around 30 minutes if it is low.

The controller works best when it is fully charged, though it might still function if the battery is low. In addition, if the battery is low, the controller may occasionally have trouble connecting.

You need to find the PlayStation button.

The PlayStation logo may be found on this button, which is located between the analogue sticks.

Hold the button down for roughly 10 seconds. Ideally, the controller will shut off.

Switch on the controller. This will restart the controller, which should often solve the issue.

Bluetooth Sharing Mode

It’s simple to overlook turning on Bluetooth sharing mode for the controller.

You might need to perform this to reestablish the connection if the controller and console were disconnected.

If you’re matching the two for the first time, you might also need to do this.

Simply hold both the PlayStation and Sharing buttons simultaneously for around five seconds.

The controller can now be connected to a PS4 or any other compatible device thanks to this.

Select the PS4 controller, and it should connect.

Reset the PS4 Controller

The next step in troubleshooting is to reset the PS4 controller.

In actuality, this is identical to rebooting the controller.

The primary distinction is that resetting the controller puts it back to its factory configuration.

You will require anything long and thin, such a toothpick, bobby pin, paperclip, etc.

You can see a little hole on the back of the PS4 controller if you turn it over.

Next to the upper left side, here is where it is.

When you place the item, a button should be pushed.

You should hear two beeps after holding the button down for around three seconds.

Take the thing out. The controller ought to be turned off as a result.

Restart the controller and try to establish a connection.

Make sure the controller is charged before attempting this because a low battery can potentially interfere with connections.

Check Console Power Cables

The only other simple remedy that requires the console itself is this one, which is also a simple fix.

The console’s power cable may occasionally experience issues.

Although you might expect that to stop the console from turning on, it isn’t always the case.

Sometimes all it does is cause power instability or make it impossible for controllers to connect.

Ensure that the console’s power cable is completely inserted.

Check the cable itself to determine if any components are worn out or broken.

In that case, you might want to get a new power cable.

Advanced Troubleshooting Steps

Since these processes are a little more difficult, it would be preferable to seek professional assistance.

While I will go over the more complex troubleshooting techniques to help solve a blinking PS4 controller, I advise against opening the console or taking any other harsh measures without additional assistance.

If performed wrong, any of these processes could delete your data or result in additional issues.

I advise involving a repair person because of this.

Working on the console directly is what each of these stages entails.

It’s simple to assume that the PS4 controller itself is the issue, however keep in mind that the blue blinking light merely indicates that the controller is unable to connect to a device.

A connection may be impossible if the hardware is malfunctioning.

Check the PS4 Hard Drive

Inadequate connections to the PS4 hard drive can cause a number of issues, including the inability to attach controllers.

Changing the hard drive or purchasing a console with an updated hard drive is when this occurs the most frequently.

Remove the power cable from the PS4 and turn it off.

Uncover the hard drive, if necessary. This breaks off quickly and is on the side of the PS4.

Now the hard drive will be seen.

If at all possible, try to keep it away from dust and other contaminants.

You’ll notice screws securing the hard drive.

Verify the screws to see whether they are loose. If so, use a screwdriver to tighten them up.

Avoid making them overly restrictive. All you need to do is make sure they are secure enough to hold the hard disc.

Check to see whether the issue is resolved by putting the cover back on and powering on the PS4.

Safe Mode

Given that this remedy has drawbacks, this should be your last option.

Before even performing this troubleshooting step, I advise backing up all of your data.

All information not kept in the cloud will be deleted.

Spend a few minutes backing up your hard drive’s contents to an external device.

The PS4 occasionally has software problems that make it impossible to connect controllers.

Similar to the hard disc portion, this typically causes other issues that you are probably already aware of.

Switch the PS4 off. Hold down the power button until safe mode loads on the PS4. This will be verified by a console beep.

Press the PlayStation button and connect a wired controller.

A new menu will appear as a result.

You will either see “rebuild database” or “restore default settings” depending on the PS4 version. The effects of both are the same.

It will take some time for the console to return to its default configuration.

This should solve the problem if the controller connected before.

Simply make sure you are ready before taking this severe action.

Related Article : What Is Ext On A PS4 Controller?

Why Is My PS4 Controller Flashing Blue And Not Connecting FAQ:

How do you fix blue light of death?

The following are some methods for resolving the blue light of death:
PS4 should start in Safe Mode. Simply hold down the Power button on your PS4 to boot up in safe mode.
Try a different HDMI cable or TV.

Examine the power supply.

Examine the hard drive.

Check the TV’s firmware.

Reset settings to default.

Speak with a professional.

What does the blue light of death look like?

When you turn on your PS4 and the blue light comes on and blinks—or rather, pulses—it is known as the “blue light of death,” “blinking blue light,” or “pulsing blue light.” The TV does not show anything (some TVs will simply display “no signal” and never transition to the white light).

How do I know if my PS4 died?

The PS4’s side-mounted LED indicator light should briefly pulse blue upon startup before turning white. However, for consoles with the “Blue Line of Death,” the blue light repeatedly pulses, signalling a faulty video output, before abruptly shutting out.

Similar Posts