You’ve just started playing Elden Ring and are really engrossed when all of a sudden you realise that your Dual Shock controller is glowing blue, then orange.
You think to yourself, “Huh.” That’s strange.
You’re feeling rather perplexed because you’ve never seen your controller blink those two colours at you before.
Is your controller malfunctioning? Knowing what each colour on your controller symbolises can be useful because there are so many distinct colours that can flash.
Why Is My PS4 Controller Flashing Blue Then Orange?
The Dual Shock controller typically comes in three colours: blue, white, and orange. You may have an issue on your hands if any of them suddenly start to flash, though. Your battery isn’t fully charged, there’s a problem with the connection or pairing process, there’s a problem with the Bluetooth signal, there’s a small software fault, or your controller isn’t properly syncing up with the PS4.
The lights on your controller can be used to represent several participants in your game as well as to signal controller problems.
Typically, a solid orange light indicates that the reset mode of your controller is active.
However, you know you have an issue when your lights start to blink.
Your controller is either having trouble synchronising with the device or maintaining a connection when that blue blinking light shows.
You could be looking at a variety of probable problems, ranging from a faulty Bluetooth signal to a battery that isn’t fully charged.
What does the blue and orange light indicate on a PS4 controller, and why is it blinking?
Your PlayStation 4 controller is in reset mode if an orange light appears on it.
You might possibly be in power-saving mode or on low battery.
A synchronisation issue could also be the main culprit.
The worst-case scenario You have a problem with an internal component that needs more extensive repairs or a complete replacement.
How do you fix a blue blinking light?
I’ll start by explaining what to do when the light is simply blinking blue.
Then, we’ll discuss how to diagnose an orange blinking light.
If your controller is blinking both at once, it shouldn’t be happening, but one of these remedies might work.
Crossing our fingers, yes?
Restart the Controller
The controller may glow blue at you if there is a problem with the connection.
If so, a straightforward restart might fix the issue.
Holding the button down for 10 seconds will force the controller to restart if the connection can’t be stabilised.
Reset the Controller
Try resetting the controller if the issue still exists.
Considering that all you have to do to reset it is:
- Unplug the controller from the PS4 and switch them off together.
- Find the little reset button on the controller’s rear; it’s adjacent to the L2 button.
- Use a tool with a sharp, fine-pointed tip to press the reset button for five seconds.
- Connect your PS4 again.
- Use either the original USB cable or another suitable USB cable to reattach the controller to the PS4.
- To start, press the PS button.
Repair or Replace the Controller
A controller may experience problems due to a more serious malfunction.
It can need to be fixed or replaced if something inside of it is damaged.
At that point, you should either hire a qualified repair expert or think about replacing the controller entirely.
What should I do if my controller is blinking orange?
Let’s discuss the significance of the colour orange for troubleshooting Dual Shock controllers now.
Although it doesn’t typically blink blue and orange, you should try troubleshooting given the potential issues.
Recharge the Battery
An orange light that is flashing indicates that the battery is recharging.
If you see this, simply let your battery charge until it reaches its maximum capacity.
Of course, other issues could develop, including those related to the battery or charging, the power supply, the timing, or a failing internal part.
Still, recharging the controller’s battery till it reaches 100% and then testing it out is an excellent place to start.
The orange light may stop blinking before the battery is fully charged if there is a problem with the power supply circuit.
Reset and Resynchronize the Controller
You should try doing a reset if the controller doesn’t seem to be communicating with the console properly.
To accomplish this, you must:
- Unplug the PS4 after turning it off.
- Switch the PS4 controller off and disconnect it.
- For 5 seconds, press the reset button on the controller.
- Connect your PS4 again. Use the appropriate USB cable to connect the controller to the console after that.
- To start, press the PS button.
If this doesn’t work, there may be a problem with the Bluetooth circuitry or the controller may just be getting old.
Repair or Replace the Controller
In the event that troubleshooting is unsuccessful in stopping the orange flashing light, you may once more need to decide whether to repair or replace the controller.
Instead of wasting time and money trying to have a specialist fix the controller, you might find that it is simpler to just replace the controller.
Different colours will flash on PS4 controllers for various causes.
Sometimes, the cause is not entirely obvious.
To identify and fix the problem, try a few troubleshooting techniques.
However, if there is internal wear or damage, your controller might no longer be functional.
Related Article : Why Is My PS4 Controller Flashing Blue And Not Connecting?
My PS4 Controller Flashing Blue Then Orange FAQ:
How do I fix my PS4 controller from syncing?
My PS4 Controller Won’t Sync with the Console
- Turn off your PS4. ( Make sure controller is not plugged in)
- Find a paperclip or something to reset controller. ( Under the L2 button)
- Hold reset button for ten seconds.
- Press and hold the Playstation button. It should turn your PS4 on.
What do I do if my controller won’t sync?
My PC or console won’t recognise my controller.
- Connect your controller
- Restart your console’s power supply.
- Check the batteries in your controller
- Use a USB cable to connect your controller to the gaming system.
- Update your controller
Why does my controller keep blinking but not connecting?
Look for issues with the controller, such as loose connections or malfunction. Resynchronize the controller and console if they are out of sync. A faulty controller, cable interference, an overheated console, and other factors could potentially be to blame for a blinking controller.
How do I connect my PS4 controller without the cord?
Connect the controller to your PlayStation via Bluetooth.
- Turn on the PS4 with the button on the PlayStation 4.
- Press the PlayStation button on your controller for a few seconds. …
- Select ‘Devices’ and click ‘Bluetooth devices’.
- Select your new controller and follow the instructions on the screen.